JIANA ZHILIAN Wire Harness · Dongguan, China
Standards & sourcing

MOQ, tooling and sample lead time: how a harness quotation is actually structured

Why one supplier quotes 500 pcs minimum and another 5,000, where tooling charges come from, and the four numbers in a quote that determine whether the price is real.

6 min read

Two quotes for the same harness can differ by 40% without either supplier being wrong. The difference is usually in what is included, what the MOQ assumes, and whether tooling is amortised or charged separately.

Knowing how the number is built makes the comparison meaningful.

The four numbers in a real quote

1. Unit price — and what quantity it assumes

A unit price without a quantity attached is not a price. The same part at 500 pcs and at 50,000 pcs can differ by a factor of two, because setup, tooling and material buying are spread over the run.

Ask: at what quantity is this unit price valid, and what does it become at half and at double that volume.

2. Tooling and setup

Where the charges come from:

Item Charge when
Crimp applicator / die Terminal type not already in the plant
Injection mold Custom overmold or housing
Test fixture Multi-pin harness needing a dedicated tester
First-article inspection Almost always free; sometimes charged

Tooling is normally a one-time charge, and often waived above a volume threshold. Ask whether it is refundable, and who owns the tool if you move.

3. MOQ — and what it is based on

MOQ is rarely arbitrary. It reflects one of three things:

  • Material MOQ. Wire and terminals come on reels. If your part uses 40 m of a 500 m reel, the supplier is buying a reel for your order.
  • Setup time. Machine setup is the same for 100 pcs or 10,000 pcs.
  • Line efficiency. A short run on an automated line is not worth scheduling.

That is why MOQ varies by part: 500 pcs for a standard assembly on stock components, 5,000 pcs for one requiring a custom mold.

4. Lead time — split into its parts

“15 days” hides three different clocks:

  • Sample lead time — typically 3–5 working days for a standard assembly, 7–10 where a new mold is needed
  • Material lead time — zero if components are in stock, 2–4 weeks if a connector has to be ordered
  • Production lead time — typically 15–20 working days after drawing approval and deposit

Ask which one the quoted number refers to. A quote of “15 days” that assumes material on the shelf becomes 6 weeks if the connector is not.

Why quotes differ so much

Reason Effect on price
Different MOQ assumption Large
Tooling included vs separate Large at low volume
Connector origin (brand vs generic) Moderate
Gauge or insulation specified differently Moderate
Test requirement (continuity vs hipot) Small to moderate
Payment terms Small
Incoterm (EXW vs DDP) Large — freight is in one and not the other

The last one catches people. An EXW quote and a DDP quote for the same goods are not comparable until freight and duty are added.

Questions that make a quote comparable

  1. What quantity is this unit price for?
  2. Is tooling included, and is it refundable?
  3. What is the MOQ based on — material, setup or line efficiency?
  4. Does the lead time assume material in stock?
  5. Which Incoterm, and what is excluded?
  6. What is the payment term?
  7. What test is included in the price, and what costs extra?

Ask all seven of both suppliers and the comparison becomes straightforward.

Frequently asked

Why is a 100 pcs prototype so expensive? Because setup, tooling and material all land on 100 units. The per-unit price at that volume is not predictive of production pricing.

Can tooling be waived? Often above a volume threshold, or amortised into the first orders. Ask before assuming either way.

Who owns the tool if we move suppliers? Whatever the contract says. If you paid for it, say so in writing — otherwise it stays with the factory.


Send us the drawing, the target quantity and the annual volume, and we will quote with the MOQ basis, tooling position and lead-time breakdown stated explicitly rather than as a single number.

Need this built to your drawing?

Send the drawing, the gauge and the annual volume — we quote within one working day and sign an NDA before drawings change hands.

Request a quotation

← All technical notes