Product family
Adapter Cables
Connector-to-connector adapter leads built to order: MC4, XT30/XT60/XT90, XT60H, EC5, SAE, Anderson, DC5525 and 12 V cigarette plugs. Every assembly is rated by its weaker end, so a 30 A MC4 feeding a 50 A Anderson is still supplied as a 30 A part — that is the number we print on the drawing and the number we test to. Length, wire gauge, exit direction and sleeving are made to your specification, from one-off prototypes to 30,000 pieces a day.
-
MC4 to Anderson 30A Adapter Converts an MC4 photovoltaic connector to an Anderson 30 A connector, for solar panels feeding storage batteries, RV auxiliary banks and portable power stations. MC4 PV connector → Anderson 30 A30 A max (limited by the MC4 end) -
MC4 to Cigarette Plug Adapter Converts a solar panel output to a 12 V cigarette-lighter plug, with a fused plug body for in-vehicle charging. MC4 PV connector → 12 V cigarette plug10 A max (set by the fused plug) -
SAE to EC5 Adapter Connects an SAE bullet connector to an EC5 high-current connector — the usual bridge between a solar maintainer and an RV or storage battery. SAE bullet → EC5 high-current connector20 A max (limited by the SAE end) -
SAE to SAE Extension Lead An SAE bullet-to-bullet extension lead with molded housings, for lengthening solar panel and battery-tender runs. SAE bullet → SAE bullet20 A max -
XT60 Female to EC5 Adapter Adapts an XT60 battery pack to an EC5 load or charger — the common mismatch in RC, drone and power-tool packs. XT60-F female → EC530 A max (limited by the XT60 end) -
XT60 to OT Ring Terminal Lead Terminates an XT60 battery connector in OT ring terminals for bolted connections to busbars, breakers and fuse blocks. XT60-F female → OT ring terminal (2×)Set by wire gauge and stud size -
XT60 Female to Cigarette Plug Lead Runs a 12 V device from an XT60 battery pack through a vehicle cigarette socket, with a fused plug body. XT60-F female → 12 V cigarette plug10 A max (set by the fused plug) -
XT60 Male to Cigarette Plug Lead The male XT60 variant of the cigarette-plug lead, for packs that present a female XT60 receptacle. XT60-M male → 12 V cigarette plug10 A max (set by the fused plug) -
XT60 Male to Alligator Clips Clips an XT60 pack onto a battery post or terminal for jump-starting, testing and temporary take-off. XT60-M male → alligator clipsSet by wire gauge and clip size -
XT60H Female to Cigarette Plug Lead Uses the latched XT60H connector on the battery side, which resists vibration far better than a plain XT60. XT60H-F female → 12 V cigarette plug10 A max (set by the fused plug) -
XT60H Male to Female Extension A latched XT60H male-to-female extension lead rated 25 A, for moving a pack connection further from the load. XT60H male → XT60H female25 A max -
Anderson 30A to DC5525 Male Takes an Anderson 30 A battery connection down to a 5.5 × 2.1 mm DC plug for routers, cameras and industrial 12 V equipment. Anderson 30 A → DC 5.5 × 2.1 mm male5 A max (set by the barrel jack) -
Anderson 30A to DC5525 Female The socket version: an Anderson 30 A source feeding equipment that presents a 5.5 mm DC barrel plug. Anderson 30 A → DC 5.5 × 2.1 mm female5 A max (set by the barrel jack) -
Anderson 30A to RVN Ring Terminal Converts an Anderson connector to insulated RVN ring terminals for bolted connections in cabinets and distribution boards. Anderson 30 A → RVN insulated ring terminal (2×)Set by wire gauge and stud size -
Anderson 30A to Cigarette Plug Lead Feeds in-vehicle 12 V equipment from an Anderson-connected battery or storage pack, with a fused plug. Anderson 30 A → 12 V cigarette plug10 A max (set by the fused plug) -
Anderson 30A to Alligator Clips Clips an Anderson-connected pack onto a battery post or terminal for starting, testing and emergency take-off. Anderson 30 A → alligator clipsSet by wire gauge and clip size -
Anderson 50A to Cigarette Plug Lead The 50 A Anderson version, for larger storage banks feeding in-vehicle 12 V equipment through a fused plug. Anderson 50 A → 12 V cigarette plug10 A max (set by the fused plug)
Need something not listed?
These are the parts already in tooling. Most orders are something else — send the drawing and we will quote it the same way.