JIANA ZHILIAN Wire Harness · Dongguan, China
Standards & sourcing

How to audit a wire harness factory remotely

You cannot fly to Dongguan for every supplier. The eight things that can be verified from photographs, documents and a video call — and the three that genuinely need a visit.

6 min read

Most buyers cannot visit every supplier. That is fine — a surprising amount of a harness factory’s capability is verifiable from photographs, documents and a forty-minute video call, if you ask for the right things.

Verifiable remotely

1. The crimp process (ask for a video, not a photo)

A photo of a crimping machine proves nothing. Ask for a short video of a crimp being made with the force monitor display visible, showing the reading.

If they cannot produce it, there is either no force monitoring or no willingness to show it. Both are answers.

2. Crimp records for a recent batch

Ask for a batch record: crimp height values, pull-force values, sample frequency, and the work order it belongs to. This is the single most informative document a harness factory can produce, because it proves the process is measured rather than felt.

3. The test station

Ask what the continuity tester does when a harness fails — does it stop the line, log it, segregate the part? A photo of a tester is a photo of equipment; a description of the failure path is a description of a process.

4. Material certificates

Wire and terminal certificates of conformity, one per material, dated. If they cannot produce these for a recent order, they are not retaining them.

5. Drawing revision control

Ask what happens when you send a revision. Who logs it, who signs it off, how does the line know the old revision is superseded, and what happens to parts already built.

The answer reveals whether change control exists as a system or as an email.

6. Traceability, end to end

Ask them to take one carton from the shelf and walk back to the wire batch it came from. If they can, traceability exists. If the answer is “we can find the work order eventually”, it does not.

7. The 8D process

Ask for a real 8D report from a past claim, redacted. How thorough it is, and whether it finds a root cause or just restates the problem, tells you how a future claim will be handled.

8. Who reports to whom

Ask for an organization chart, and where quality sits. A quality manager reporting to the production manager is a structural conflict that shows up in a claim.

Needs a visit

The floor itself. Photographs are curated. Walking the floor shows whether the workspace is organized, whether there are bins of unlabelled parts, and whether the mood is rushed.

Warehouse discipline. Plated contacts stored in the open, wire coils on the floor, humidity above spec — these degrade quality invisibly and nobody photographs them.

Who does what. Whether the person answering your emails is also the quality manager, the buyer and the shipping clerk.

A forty-minute video call that works

Structure it:

  1. 10 min — floor walk. Live, not a pre-recorded tour. Ask them to show you the crimping area and the test station as they are.
  2. 10 min — records. Ask them to open a recent batch record on screen and explain it.
  3. 10 min — your part. Show a similar part and ask how they would build it. Listen for questions: a good factory asks about gauge, datum and test requirements.
  4. 10 min — claims. Ask for the last claim they had and what happened.

That call separates a factory from a trading company more reliably than any document set.

Frequently asked

Should I use a third-party inspection service? For pre-shipment inspection, yes — it is cheap and catches quantity and appearance issues. It does not substitute for a process audit.

Is a trading company always worse? No. A good trading company with technical staff and reliable factories can be easier to work with. The risk is that you cannot see the process, so ask which factory and audit that one.

What is the most common red flag? Answers that describe intention rather than fact: “we will check that”, “normally we do”, “our engineers ensure”. Ask for the record instead.


We will run the forty-minute call above with any prospective customer, including the batch record screen share. Ask for it when you request a quotation.

Need this built to your drawing?

Send the drawing, the gauge and the annual volume — we quote within one working day and sign an NDA before drawings change hands.

Request a quotation

← All technical notes