JIANA ZHILIAN Wire Harness · Dongguan, China
Standards & sourcing

RoHS and REACH for cable assemblies: what to ask a supplier for

A "RoHS compliant" line on a datasheet is not a declaration. What the two regulations actually require of a harness, and the paperwork that satisfies a European customer.

5 min read

European buyers routinely ask for RoHS and REACH compliance on cable assemblies. The answers received vary from a proper declaration with test data to a line of text in an email. The difference matters at customs and in an audit.

What the two regulations cover

RoHS restricts ten substances in electrical and electronic equipment — lead, mercury, cadmium, hexavalent chromium, PBB, PBDE, and four phthalates. It applies to the finished product; a component that is RoHS compliant contributes to compliance.

REACH is broader: it covers all chemical substances, with a candidate list of substances of very high concern (SVHC). The obligation for an article is communication: if an SVHC is present above 0.1% by weight, the customer must be informed.

Note the difference. RoHS says “do not use these ten”. REACH says “if you use one of these several hundred, tell us”.

The SVHC list moves twice a year

The REACH candidate list is updated roughly every January and June, and it grows. A declaration dated three years ago is a declaration against an older list.

Ask for a declaration dated within the last 12 months, and check the SVHC count it references against the current list.

What a usable declaration contains

A compliant declaration is more than a sentence. It should state:

  • The regulation and the specific restricted substance list version
  • The material or part covered — “all materials in the assembly”, not just “our products”
  • Whether testing was done, and by whom, or whether it is based on supplier declarations
  • The date and the signatory

Where harnesses are actually at risk

Cable assemblies are low-risk compared with electronics, but three areas matter:

Component Risk What to check
PVC insulation Phthalate plasticisers, and lead stabilisers in older compounds RoHS phthalate restriction
Solder (if any) Lead in non-RoHS solder Explicit RoHS solder, or lead-free process
Plating Cadmium in some older plating processes; hexavalent chromium in passivation Certificate of conformity from the plater
Cable jacket pigment Occasionally heavy-metal pigments Supplier declaration

The crimped-connection nature of most harnesses means little solder, which lowers risk — but any soldered joint in the assembly brings lead into scope.

What to ask for

  1. A declaration per material, dated within 12 months, naming the SVHC list revision.
  2. Certificates of conformity for wire and terminals from the component manufacturers — these are what your supplier is relying on.
  3. A test report if the material is in a higher-risk category (PVC, plated parts).
  4. A statement of the process — is there any solder, and is it lead-free?

Frequently asked

Is RoHS the same in the UK and EU? The UK has its own RoHS with the same ten substances. Practical effect is similar; the declaration should name the regulation it addresses.

Does REACH apply if we are outside the EU? If you place the article on the EU market, yes. The obligation sits with the EU importer in the first instance, and they will pass it back to you.

Is a “RoHS compliant” label enough? No. It is a claim without evidence. A declaration with material scope and a date is the minimum that survives an audit.


We supply RoHS and REACH declarations per material with any order, dated to the current candidate list, along with the component manufacturers’ conformity certificates. Ask for a sample with your quotation.

Need this built to your drawing?

Send the drawing, the gauge and the annual volume — we quote within one working day and sign an NDA before drawings change hands.

Request a quotation

← All technical notes