LCB30 High-Current Connector
A latched two-pin connector rated 35 A on 12 AWG and 25 A on 14 AWG, 600 V DC, with a silver-plated copper contact set in an orange PBT GF30 housing.
- Configuration Two-pin, latched, flying lead (LCB30-F / male)
- Current rating 35 A max @ 12 AWG (4.0 mm²) · 25 A max @ 14 AWG (2.5 mm²), ΔT ≤ 40 K
- Rated voltage 600 V DC
- Contact resistance ≤ 0.6 mΩ
Part reference JN-993 · MOQ 500 pcs · Sample in 3–5 working days
LCB30 is the flying-lead version of the two-pin LC30 series. It is used where the enclosure is tight and the battery-to-controller or motor-to-controller run has to be plugged rather than hard-wired.
The latch holds the pair together under vibration and gives a positive click on engagement. Contacts are silver-plated copper, crimped by hexagonal indent, and the housing is glass-filled PBT molded in orange so the connector is easy to identify on a bench.
Current rating is tied to wire gauge, not to the housing: 35 A on 12 AWG (4.0 mm²) and 25 A on 14 AWG (2.5 mm²), both at a temperature rise of 40 K or less.
Technical data
| Configuration | Two-pin, latched, flying lead (LCB30-F / male) |
|---|---|
| Current rating | 35 A max @ 12 AWG (4.0 mm²) · 25 A max @ 14 AWG (2.5 mm²), ΔT ≤ 40 K |
| Rated voltage | 600 V DC |
| Contact resistance | ≤ 0.6 mΩ |
| Insulation resistance | ≥ 2000 MΩ |
| Withstand voltage | 600 V DC |
| Operating temperature | −40 °C to +120 °C |
| Flammability | UL94 V-0 (0.8 mm wall) |
| Glow-wire | GWFI 850 °C (0.8 mm wall) |
| Mating cycles | 50 |
| Insertion force | ≤ 5.0 kgf |
| Retention force (latched) | ≥ 8.0 kg |
| Salt spray | 48 h |
| Termination | Hexagonal indent crimp, 5 mm barrel |
| Contact material | Copper, silver plated |
| Housing material | PBT GF30, orange |
| Compliance | RoHS 2.0 |
Typical applications
- Battery to controller on lithium packs
- Motor to controller on compact drives
- Equipment where enclosure space is tight
- Storage and portable power packs
What we can change
- Wire gauge and length built to drawing
- Strip and tin length
- Sleeving, braid and heat-shrink
- Labeling and export packing
Questions about this part
Why is the rating 35 A and not higher?
The figure is quoted at a defined wire gauge and a 40 K temperature rise. With 12 AWG the assembly reaches 35 A; with 14 AWG it reaches 25 A. Anything higher would exceed the permitted temperature rise at those gauges.
Does the latch hold under vibration?
The latched retention force is at least 8.0 kg, against an insertion force of no more than 5.0 kgf. In practice the pair will not separate under vehicle or machinery vibration without the latch being released.
How should plated parts be stored?
Silver-plated contacts should be kept sealed and out of light, away from sulphides, and never handled with bare hands. Recommended storage is −10 °C to +40 °C at ≤ 80% RH.
Other parts in this range
Send the drawing for lcb30 high-current connector
Attach the drawing, a sample photo with dimensions, or your target specification. We quote within one working day and sign an NDA before drawings change hands.