JIANA ZHILIAN Wire Harness · Dongguan, China
Terminal Wire Harnesses

Dual-Row Box Header with Ejector Latches

Dual-row through-hole (DIP) wire-to-board connector, ejector latches.

  • Rows 2 (dual row)
  • Termination type Crimp, discrete wire
  • Mounting Through-hole (DIP)
  • Body orientation Straight (180°)

Part reference JN-10028 · MOQ 500 pcs · Sample in 3–5 working days

A dual-row through-hole (DIP) wire-to-board connector: straight body, ejector latches. The photographs on this page are the actual part: complete set, mated pair, wafer, housing and loose crimp terminals. Supplied crimped to length, or as loose housings and terminals on the carrier strip if you terminate in-house.

A shrouded box header with ejector latches, used at the ribbon-cable end of a board-level link. The latch levers release the mating socket without pulling on the cable, and the shroud keys the connector so it cannot be inserted the wrong way round.

Electrical figures in the table are the published typical values for this connector class, not a measured guarantee for every circuit count. Send us the circuit count, wire gauge and current per contact and we will confirm the correct part number and issue a drawing before the first piece is crimped.

Technical data

Rows 2 (dual row)
Termination type Crimp, discrete wire
Mounting Through-hole (DIP)
Body orientation Straight (180°)
Retention Ejector latches on the shroud
Shroud Four-sided shroud with polarising slot
Housing material Nylon 66, UL94 V-0
Contact material Brass, tin plated
Circuit range Made to order — 2 ways upward
Electrical values Typical for this connector class
Current rating 3 A per circuit (typical)
Voltage rating 250 V AC/DC (typical)
Contact resistance 20 mΩ max (typical)
Insulation resistance 1000 MΩ min (typical)
Dielectric withstanding 500 V AC for 1 min (typical)
Operating temperature −25 °C to +85 °C (typical)
Wire range 30–22 AWG (0.05–0.33 mm²)
Compliance RoHS

Typical applications

  • Ribbon-cable links between boards and backplanes
  • Programmer and debug headers on production boards
  • Equipment racks where a keyed, latched link is required
  • Test and burn-in fixtures

What we can change

  • Circuit count from 2 ways upward, to your drawing
  • Lead length, strip length and tinning to specification
  • Wire gauge and insulation color matched to your schedule
  • Loose parts, or finished leads with 100% continuity test

Questions about this part

What is the pitch of this connector?

The source photographs do not record a pitch, so we have not published one. Tell us the pitch you need — 1.0, 1.25, 1.5, 2.0, 2.5 or 2.54 mm are all in the same tooling family — and we will send the matching drawing and sample.

Can you supply the finished lead rather than loose parts?

Yes. This part is normally shipped as a crimped lead: wire cut to length, terminals crimped, and 100% continuity tested. Loose housings and terminals on the carrier strip are also available if you terminate in-house.

Are the electrical ratings on this page guaranteed?

No. They are the published typical values for this connector class, shown so you can judge suitability. The guaranteed figures come with the drawing for your exact circuit count, wire gauge and contact variant.

How is the connector released?

Squeeze the two latch levers outward; the socket lifts off the header without cable load.

Next step

Send the drawing for dual-row box header with ejector latches

Attach the drawing, a sample photo with dimensions, or your target specification. We quote within one working day and sign an NDA before drawings change hands.