JIANA ZHILIAN Wire Harness · Dongguan, China
Terminal Wire Harnesses

Dual-Row DIP Wire-to-Board Connector, Friction Lock

Dual-row through-hole (DIP) wire-to-board connector, friction lock.

  • Rows 2 (dual row)
  • Termination type Crimp, discrete wire
  • Mounting Through-hole (DIP)
  • Body orientation Straight (180°)

Part reference JN-10027 · MOQ 500 pcs · Sample in 3–5 working days

A dual-row through-hole (DIP) wire-to-board connector: straight body, friction lock. The photographs on this page are the actual part: complete set, mated pair, wafer, housing and loose crimp terminals. Supplied crimped to length, or as loose housings and terminals on the carrier strip if you terminate in-house.

The common building block for control boards, appliance wiring and sensor looms: the wafer reflows or wave-solders to the PCB and the crimped lead plugs in afterwards, so the harness and the board can be produced and tested separately.

Electrical figures in the table are the published typical values for this connector class, not a measured guarantee for every circuit count. Send us the circuit count, wire gauge and current per contact and we will confirm the correct part number and issue a drawing before the first piece is crimped.

Technical data

Rows 2 (dual row)
Termination type Crimp, discrete wire
Mounting Through-hole (DIP)
Body orientation Straight (180°)
Retention Friction lock on the housing
Housing material Nylon 66, UL94 V-0
Contact material Brass, tin plated
Circuit range Made to order — 2 ways upward
Electrical values Typical for this connector class
Current rating 3 A per circuit (typical)
Voltage rating 250 V AC/DC (typical)
Contact resistance 20 mΩ max (typical)
Insulation resistance 1000 MΩ min (typical)
Dielectric withstanding 500 V AC for 1 min (typical)
Operating temperature −25 °C to +85 °C (typical)
Wire range 30–22 AWG (0.05–0.33 mm²)
Compliance RoHS

Typical applications

  • Control and driver boards in appliances and power tools
  • Sensor and signal looms inside equipment enclosures
  • LED strip and lighting connections
  • Battery management and charger boards

What we can change

  • Circuit count from 2 ways upward, to your drawing
  • Lead length, strip length and tinning to specification
  • Wire gauge and insulation color matched to your schedule
  • Loose parts, or finished leads with 100% continuity test

Questions about this part

What is the pitch of this connector?

The source photographs do not record a pitch, so we have not published one. Tell us the pitch you need — 1.0, 1.25, 1.5, 2.0, 2.5 or 2.54 mm are all in the same tooling family — and we will send the matching drawing and sample.

Can you supply the finished lead rather than loose parts?

Yes. This part is normally shipped as a crimped lead: wire cut to length, terminals crimped, and 100% continuity tested. Loose housings and terminals on the carrier strip are also available if you terminate in-house.

Are the electrical ratings on this page guaranteed?

No. They are the published typical values for this connector class, shown so you can judge suitability. The guaranteed figures come with the drawing for your exact circuit count, wire gauge and contact variant.

How is the connector released?

Press the latch tab on the housing and pull the housing, never the wires.

Next step

Send the drawing for dual-row dip wire-to-board connector, friction lock

Attach the drawing, a sample photo with dimensions, or your target specification. We quote within one working day and sign an NDA before drawings change hands.