Dual-Row In-Line Wire-to-Wire Connector, Winged
Dual-row in-line wire-to-wire connector, friction lock, locking wings.
- Rows 2 (dual row)
- Termination type Crimp, discrete wire
- Mounting Free-hanging, in-line mating
- Body orientation Straight (180°)
Part reference JN-10012 · MOQ 500 pcs · Sample in 3–5 working days
A dual-row in-line wire-to-wire connector: straight body, friction lock, locking wings. The photographs on this page are the actual part: mated pair, single housing and loose crimp terminals on the carrier strip. Supplied crimped to length, or as loose housings and terminals on the carrier strip if you terminate in-house.
Used where two cable runs have to join without a PCB in between: door and panel links, battery and motor extensions, and modular assemblies that are built and tested as sub-harnesses before the final build. Both halves are crimped and terminated in-house.
Electrical figures in the table are the published typical values for this connector class, not a measured guarantee for every circuit count. Send us the circuit count, wire gauge and current per contact and we will confirm the correct part number and issue a drawing before the first piece is crimped.
Technical data
| Rows | 2 (dual row) |
|---|---|
| Termination type | Crimp, discrete wire |
| Mounting | Free-hanging, in-line mating |
| Body orientation | Straight (180°) |
| Retention | Friction lock on the housing |
| Sides | Locking wings |
| Housing material | Nylon 66, UL94 V-0 |
| Contact material | Brass, tin plated |
| Circuit range | Made to order — 2 ways upward |
| Electrical values | Typical for this connector class |
| Current rating | 3 A per circuit (typical) |
| Voltage rating | 250 V AC/DC (typical) |
| Contact resistance | 20 mΩ max (typical) |
| Insulation resistance | 1000 MΩ min (typical) |
| Dielectric withstanding | 500 V AC for 1 min (typical) |
| Operating temperature | −25 °C to +85 °C (typical) |
| Wire range | 30–22 AWG (0.05–0.33 mm²) |
| Compliance | RoHS |
Typical applications
- Door and panel links where a board-side connector is not wanted
- Battery pack and motor lead extensions
- Sub-harnesses built and tested before final assembly
- Modular lighting and sensor runs
What we can change
- Circuit count from 2 ways upward, to your drawing
- Lead length, strip length and tinning to specification
- Wire gauge and insulation color matched to your schedule
- Loose parts, or finished leads with 100% continuity test
Questions about this part
What is the pitch of this connector?
The source photographs do not record a pitch, so we have not published one. Tell us the pitch you need — 1.0, 1.25, 1.5, 2.0, 2.5 or 2.54 mm are all in the same tooling family — and we will send the matching drawing and sample.
Can you supply the finished lead rather than loose parts?
Yes. This part is normally shipped as a crimped lead: wire cut to length, terminals crimped, and 100% continuity tested. Loose housings and terminals on the carrier strip are also available if you terminate in-house.
Are the electrical ratings on this page guaranteed?
No. They are the published typical values for this connector class, shown so you can judge suitability. The guaranteed figures come with the drawing for your exact circuit count, wire gauge and contact variant.
How is the connector released?
Press the latch tab on the housing and pull the housing, never the wires.
Other parts in this range
Send the drawing for dual-row in-line wire-to-wire connector, winged
Attach the drawing, a sample photo with dimensions, or your target specification. We quote within one working day and sign an NDA before drawings change hands.