Single-Row 180° Straight Plug-In Connector
Single-row through-hole wire-to-board connector.
- Rows 1 (single row)
- Termination type Crimp, discrete wire
- Mounting Through-hole
- Body orientation Straight (180°)
Part reference JN-10037 · MOQ 500 pcs · Sample in 3–5 working days
A single-row through-hole wire-to-board connector: straight body. The photographs on this page are the actual part: complete set, mated pair, wafer, housing and loose crimp terminals. Supplied crimped to length, or as loose housings and terminals on the carrier strip if you terminate in-house.
The common building block for control boards, appliance wiring and sensor looms: the wafer reflows or wave-solders to the PCB and the crimped lead plugs in afterwards, so the harness and the board can be produced and tested separately.
Electrical figures in the table are the published typical values for this connector class, not a measured guarantee for every circuit count. Send us the circuit count, wire gauge and current per contact and we will confirm the correct part number and issue a drawing before the first piece is crimped.
Technical data
| Rows | 1 (single row) |
|---|---|
| Termination type | Crimp, discrete wire |
| Mounting | Through-hole |
| Body orientation | Straight (180°) |
| Retention | No lock — friction fit only |
| Housing material | Nylon 66, UL94 V-0 |
| Contact material | Brass, tin plated |
| Circuit range | Made to order — 2 ways upward |
| Electrical values | Typical for this connector class |
| Current rating | 3 A per circuit (typical) |
| Voltage rating | 250 V AC/DC (typical) |
| Contact resistance | 20 mΩ max (typical) |
| Insulation resistance | 1000 MΩ min (typical) |
| Dielectric withstanding | 500 V AC for 1 min (typical) |
| Operating temperature | −25 °C to +85 °C (typical) |
| Wire range | 30–22 AWG (0.05–0.33 mm²) |
| Compliance | RoHS |
Typical applications
- Control and driver boards in appliances and power tools
- Sensor and signal looms inside equipment enclosures
- LED strip and lighting connections
- Battery management and charger boards
What we can change
- Circuit count from 2 ways upward, to your drawing
- Lead length, strip length and tinning to specification
- Wire gauge and insulation color matched to your schedule
- Loose parts, or finished leads with 100% continuity test
Questions about this part
What is the pitch of this connector?
The source photographs do not record a pitch, so we have not published one. Tell us the pitch you need — 1.0, 1.25, 1.5, 2.0, 2.5 or 2.54 mm are all in the same tooling family — and we will send the matching drawing and sample.
Can you supply the finished lead rather than loose parts?
Yes. This part is normally shipped as a crimped lead: wire cut to length, terminals crimped, and 100% continuity tested. Loose housings and terminals on the carrier strip are also available if you terminate in-house.
Are the electrical ratings on this page guaranteed?
No. They are the published typical values for this connector class, shown so you can judge suitability. The guaranteed figures come with the drawing for your exact circuit count, wire gauge and contact variant.
Other parts in this range
Send the drawing for single-row 180° straight plug-in connector
Attach the drawing, a sample photo with dimensions, or your target specification. We quote within one working day and sign an NDA before drawings change hands.