JIANA ZHILIAN Wire Harness · Dongguan, China
Terminal Wire Harnesses

Single-Row Right-Angle IDC Connector, Locked, Corner Key

Single-row through-hole (DIP) wire-to-board connector, insulation-displacement termination, friction lock, corner key.

  • Rows 1 (single row)
  • Termination type IDC insulation-displacement
  • Mounting Through-hole (DIP)
  • Body orientation Right-angle (90°)

Part reference JN-10008 · MOQ 500 pcs · Sample in 3–5 working days

A single-row through-hole (DIP) wire-to-board connector: right-angle body, insulation-displacement termination, friction lock, corner key. The photographs on this page are the actual part: complete set, mated pair, wafer, housing and loose crimp terminals. Supplied crimped to length, or as loose housings and terminals on the carrier strip if you terminate in-house.

Insulation-displacement contacts press through the insulation in a single operation, so a flat or discrete cable is terminated without stripping or soldering. Mass termination keeps the per-circuit cost low on assemblies above roughly ten ways.

Electrical figures in the table are the published typical values for this connector class, not a measured guarantee for every circuit count. Send us the circuit count, wire gauge and current per contact and we will confirm the correct part number and issue a drawing before the first piece is crimped.

Technical data

Rows 1 (single row)
Termination type IDC insulation-displacement
Mounting Through-hole (DIP)
Body orientation Right-angle (90°)
Retention Friction lock on the housing
Polarising Corner key
Housing material Nylon 66, UL94 V-0
Contact material Brass, tin plated
Circuit range Made to order — 2 ways upward
Electrical values Typical for this connector class
Current rating 3 A per circuit (typical)
Voltage rating 250 V AC/DC (typical)
Contact resistance 20 mΩ max (typical)
Insulation resistance 1000 MΩ min (typical)
Dielectric withstanding 500 V AC for 1 min (typical)
Operating temperature −25 °C to +85 °C (typical)
Wire range 30–22 AWG (0.05–0.33 mm²)
Compliance RoHS

Typical applications

  • Ribbon and flat-cable termination inside control enclosures
  • Appliance control boards with high circuit counts
  • Mass-terminated looms where per-circuit labour has to stay low
  • Test fixtures and breakout boards

What we can change

  • Circuit count from 2 ways upward, to your drawing
  • Lead length, strip length and tinning to specification
  • Wire gauge and insulation color matched to your schedule
  • Loose parts, or finished leads with 100% continuity test
  • Cable pitch and ribbon width matched to the IDC cover

Questions about this part

What is the pitch of this connector?

The source photographs do not record a pitch, so we have not published one. Tell us the pitch you need — 1.0, 1.25, 1.5, 2.0, 2.5 or 2.54 mm are all in the same tooling family — and we will send the matching drawing and sample.

Can you supply the finished lead rather than loose parts?

Yes. This part is normally shipped as a crimped lead: wire cut to length, terminals crimped, and 100% continuity tested. Loose housings and terminals on the carrier strip are also available if you terminate in-house.

Are the electrical ratings on this page guaranteed?

No. They are the published typical values for this connector class, shown so you can judge suitability. The guaranteed figures come with the drawing for your exact circuit count, wire gauge and contact variant.

How is the connector released?

Press the latch tab on the housing and pull the housing, never the wires.

Next step

Send the drawing for single-row right-angle idc connector, locked, corner key

Attach the drawing, a sample photo with dimensions, or your target specification. We quote within one working day and sign an NDA before drawings change hands.