JIANA ZHILIAN Wire Harness · Dongguan, China
New Energy Harness

DC Charging Socket Assembly (60Plug)

An 80 A DC charging socket assembly rated to 1500 V DC and IP67, with a 90 A peak and 4000 mating cycles — built for light-electric vehicle charging inlets.

  • Configuration 2+6 charging socket assembly (60Plug series)
  • Current rating 80 A continuous
  • Peak current 90 A (terminal overload, max 45 °C ambient)
  • Rated voltage 1500 V DC

Part reference JN-275 · MOQ 500 pcs · Sample in 3–5 working days

This is the complete 2+6 charging inlet assembly: the socket body, the 2 mm signal pins and the 7 AWG power leads, terminated and tested as one part.

The power contacts are silver-plated copper on 7 AWG (10 mm²), rated 80 A continuous with a 90 A peak that corresponds to the terminal overload condition at a maximum 45 °C ambient. Sealing is IP67, so the inlet survives washing and standing water.

Mating life is 4000 cycles, which suits a vehicle inlet rather than a bench connector. Contact resistance is held at or below 0.04 mΩ.

Technical data

Configuration 2+6 charging socket assembly (60Plug series)
Current rating 80 A continuous
Peak current 90 A (terminal overload, max 45 °C ambient)
Rated voltage 1500 V DC
Wire gauge 7 AWG (10 mm²)
Contact resistance 0.04 mΩ
Insulation resistance 2000 MΩ min
Operating temperature −40 °C to +125 °C
Ingress protection IP67
Flammability UL94 V-0
Mating cycles 4000
Salt spray 48 h
Contact material Copper, silver plated
Housing material Nylon
Compliance RoHS

Typical applications

  • Light electric vehicle charging inlets
  • E-scooter and e-bike fast charging
  • Battery swap cabinet charging interface

What we can change

  • Lead length and routing direction
  • Signal pin count and assignment
  • Sleeving and strain relief
  • Labeling and export packing

Questions about this part

What does the 90 A peak figure mean?

It is the terminal overload condition at a maximum 45 °C ambient — a short-duration peak, not a continuous rating. Continuous operation is 80 A.

Next step

Send the drawing for dc charging socket assembly (60plug)

Attach the drawing, a sample photo with dimensions, or your target specification. We quote within one working day and sign an NDA before drawings change hands.