JIANA ZHILIAN Wire Harness · Dongguan, China
New Energy Harness

XT30 / XT60 / XT90 Connector Leads

Molded 2-pin connector leads on the XT30 / XT60 / XT90 family: 35 A max on 12 AWG, 500 V DC, IP40, −20 °C to +120 °C.

  • Configuration 180° molded 2-pin lead — XT60-M male / XT60-F female (also XT30, XT90 bodies)
  • Current rating 35 A max @ 12 AWG (ΔT < 85 K)
  • Withstand voltage 500 V DC
  • Wire gauge 12 AWG

Part reference JN-583 · MOQ 500 pcs · Sample in 3–5 working days

XT connectors are the default 2-pin interface for lithium packs in RC, drones, e-bikes and portable power. This range covers XT30, XT60 and XT90 bodies with molded 180° lead exits.

The assembly here is the XT60 variant: 35 A maximum on 12 AWG at a temperature rise below 85 K, 500 V DC, contact resistance at or below 1.0 mΩ and insulation resistance above 2000 MΩ. Mating life is 100 cycles and the molding carries an IP40 rating.

Contacts are gold-plated copper alloy in a PA housing supplied in yellow, black or blue. Body dimensions are 21.30 × 16.00 × 8.10 mm for the female and 20.50 × 16.00 × 8.10 mm for the male.

Technical data

Configuration 180° molded 2-pin lead — XT60-M male / XT60-F female (also XT30, XT90 bodies)
Current rating 35 A max @ 12 AWG (ΔT < 85 K)
Withstand voltage 500 V DC
Wire gauge 12 AWG
Contact resistance ≤ 1.0 mΩ
Insulation resistance ≥ 2000 MΩ
Operating temperature −20 °C to +120 °C
Ingress protection IP40
Flammability UL94 V-0
Mating cycles 100
Salt spray 48 h
Contact material Copper alloy, gold plated
Housing material PA, yellow / black / blue
Body dimensions XT60-F 21.30 × 16.00 × 8.10 mm · XT60-M 20.50 × 16.00 × 8.10 mm

Typical applications

  • RC and drone battery packs
  • E-bike and scooter packs
  • Portable power stations
  • Bench power and test leads

What we can change

  • XT30 / XT60 / XT90 body selection
  • Wire gauge from 18 to 10 AWG
  • Housing color yellow / black / blue
  • Anti-spark resistor and sleeving

Questions about this part

Is an XT60 rated 60 A?

No. XT60 is rated 35 A maximum on 12 AWG at the quoted temperature rise. The "60" is a series designation. The same applies to XT30 (15 A) and XT90 (typically 30–50 A depending on gauge).

Why only 100 mating cycles?

That is the rated life for the molded assembly at full current. It is intended as a semi-permanent pack connection, not a connector that is plugged and unplugged daily.

Next step

Send the drawing for xt30 / xt60 / xt90 connector leads

Attach the drawing, a sample photo with dimensions, or your target specification. We quote within one working day and sign an NDA before drawings change hands.